BTP140Z
18V Mobile 4 Mode Impact Driver
- Makita built 4-pole motor design with dual steel ball bearings provides maximum torque
- 4 operation modes: drill (2 speed), screwdriver, percussion drill, impact driver
- Hammer case cover protects work piece from scratches, increasing maneuverability
- Built-in L.E.D light for more illuminated accurate work
- Ergonomic design
| Capacities - Steel | Drill mode: 10mm |
| Capacities - Wood | Drill mode: 21mm |
| Capacities - Masonry | Hamer drill mode: 8mm |
| Capacities - Small screw | Impact driver mode: M4-M8 |
| Capacities - Standard bolt | Impact driver mode: M5-M14 |
| Capacities - High tensile bolt | Impact driver mode: M5-M12 |
| Capacities - Coarse thread | Impact driver mode: 22-125mm |
| Capacity | Driver drill mode: M4 |
| No load speed | Impact driver mode: 0-700rpm |
| No load speed - Highest | Driver drill mode: 0-2,300rpm |
| No load speed - Hi | Drill mode: 0-2,300rpm |
| No load speed - Lo | Drill mode: 0-700rpm |
| Impacts per minute | Impact driver mode: 0-3,200bpm |
| Impact rate | Hammer drill mode: 0-27,600bpm |
| Max. fastening torque | Impact driver mode: 140Nm |
| Max. fastening torque - Soft | Drill mode: 10Nm |
| Max. fastening torque - Hard | Drill mode: 50Nm |
| Overall length | 186mm |
| Net weight | 1.8kg |
| Voltage | 18V |
Stock ID: 18837
Barcode: BTP140Z